Howard Restor-A-Finish Restor-A-Finish is a unique finish-penetrating formula that restores the original color and luster to your finish while blending out the blemishes and minor scratches. Restor-A-Finish restores the finish in one step - without removing any of the existing finish. Restore It - Don't Strip It! With a simple wipe-on, wipe-off process, most finished wood surfaces that seem to need a refinishing job can be completely restored in a few minutes. White heat rings and water marks, sun fade, oxidation, smoke damage, and most other blemishes can be quickly eliminated. Before you go to the extreme of stripping it, try restoring it!Restor-A-Finish is available in nine colors: Neutral, Maple-Pine, Golden Oak, Cherry, Walnut, Mahogany, Dark Walnut, Dark Oak, and Ebony Brown. Treat Scratches, Nicks, and Abrasions Restor-A-Finish works best when applied with a small pad of toweling, or for severe white rings and crazing, with Super Fine(0000) steel wool. DO NOT pour directly on the finish. When using steel wool, always rub with the grain of the wood. First, determine the pressure you should use on an inconspicuous spot, as the hardness of finishes vary. Revive Wood Finishes Wipe on the appropriate color of Restor-A-Finish with a clean cloth. Let it stand for a few minutes then wipe dry. If you desire a slightly darker shade, simply apply a darker color of Restor-A-Finish. White Heat Rings and Water Marks Apply Restor-A-Finish (see above) with steel wool and rub hard enough with the grain of the wood to blend out the white effect. If high gloss finish should appear dull due to the use of steel wool, polish it out with a Howard Polishing Compound or Burnishing Cream. Raised and Blistered Finishes Apply Neutral Restor-A-Finish (to prevent darkening of wood beyond temporary "wet effect") with steel wool. As blisters soften press down while the Restor-A-Finish is applied. Wipe dry, and again later if the surface "blooms" with excess Restor-A-Finish. Restore Minor Crazed or Checked Finishes Apply Restor-A-Finish with Medium Grade(00) steel wool. Rub hard enough to smooth out the finish, periodically checking your progress. Checked or crazed surfaces may absorb an excess of Restor-A-Finish and "bloom out" requiring another wiping later. Treat Carved Wood Restor-A-Finish has saved many hours of labor by restoring the finish on carved portions of furniture and clocks. Simply apply Restor-A-Finish with a small paint brush or soft tooth brush and wipe off. ______________________________________________________________________________________________________________________________________________________________
Feed-N-Wax® Wood Polish & Conditioner Enhance the natural beauty and depth of grain in finished and unfinished wood Prevent drying and deterioration of all wood finishes Polish all wood surfaces to a soft luster and protect with a coating of natural waxes Use to maintain the restored finish after using Howard Restor-A-Finish Prevent Drying & Cracking Use Howard Feed-N-Wax to prevent drying and cracking while preserving the wood finish. Feed-N-Wax is a special blend of beeswax, carnauba wax, and orange oil. It enhances the natural beauty and depth of grain in finished and unfinished wood, especially oak. Maintain the Natural Beauty Use Feed-N-Wax every month or so to maintain the natural beauty of your wood finish. Polish all wood surfaces to a soft luster while leaving a protective coating of beeswax and carnauba wax. _____________________________________________________________________________________________________________________________________________________________
Clean-A-Finish® Clean-A-Finish Wood Soap is specially formulated for safely cleaning wood, upholstered surfaces and more. Soap-based formula does not contain bleach, ammonia or chemicals. The safe way to clean upholstery, fabric and all wood surfaces. Easily removes wax build-up on furniture and antiques. Breaks down grease and grime on kitchen cabinets and dining tables _____________________________________________________________________________________________________________________________________________________________
Howard Restor-A-Shine Howard Products has developed two products with old fashioned ingenuity for restoring the shine to semi-gloss and high-gloss wood finishes. While the name may be a bit obvious, Restor-A-Shine literally does what it says and is an excellent addition to Howard's veteran Restor-A-Finish. Our Restor-A-Finish is at its best when it comes to restoring the beginning and middle of a wood finish, as it rejuvenates the color beneath the lacquer, shellac, or varnish and it eliminates white marks and other blemishes in the finish. However, it sometimes cannot complete the restoration job when it comes to the surface of an originally high shine wood finish. This is where Restor-A-Shine comes in. It solves these subtle, yet difficult problems by polishing or burnishing the surface of the wood finish itself. Restor-A-Shine is available in two grades: Fine (Polishing Compound) and Super Fine (Burnishing Cream). Both utilize extremely fine polishing powders blended with orange oil to restore the brilliance to the look and the smoothness to the feel of a high shine wood finish. By borrowing the traditional techniques of master craftsmen and combining them with our wood care product know-how, Howard Products is continuing to develop products that make it easier for everyone to restore and mainta ______________________________________________________________________________________________________________________________________________________________
Pine-Ola ™ Instant Action - Beautifies Your Brass and Cleans Your Copper Copper & Brass Polish All things as beautiful and deeply cherished as a silver, brass or copper heirloom, deserve the finest care. Pine-Ola gives those treasures the care they require. For more than 90 years, the Pine-Ola brand of metal polishes has been the choice of leading silversmiths across the United States and Europe. Instant action!! Amazingly fast and easy to use. Cleans and polishes all ornamental copper, brass, bronze and stainless steel. Special Pine-Ola blend retards the tarnish for a long-lasting shine. No harsh chemicals or abrasives, and gentle on hands. ______________________________________________________________________________________________________________________________________________________________________
Howard Leather Conditioner A creamy conditioner that penetrates, preserves, and protects smooth leather. This unique blend of deep nourishing emollients, natural waxes, and mild cleaning agents revives dried-out leather back to its soft, natural condition without becoming greasy or sticky. For Use On: Couches, Shoes, Purses, Tack & Saddles, Auto Interiors Not to be used on Suede or Nubuck CLEANS WITH NAVEL ORANGE OIL & MILD SOAP CONDITIONS WITH LANOLIN, ALOE VERA & COCONUT OIL PROTECTS WITHCARNAUBA WAX & BEESWAX _______________________________________________________________________________________________________________________________________________________________________________________________'
Pine-Ola ™ The choice of silversmiths for over 90 years Silver Polish All things as beautiful and deeply cherished as a silver, brass or copper heirloom, deserve the finest care. Pine-Ola gives those treasures the care they require. For more than 90 years, the Pine-Ola brand of metal polishes has been the choice of leading silversmiths across the United States and Europe. The choice of silversmiths for over 90 years. Cleans and polishes all silver, silver plating, appliances, and chrome fittings. Special Pine-Ola blend retards the tarnish and keep silver bright. Quickly cleans and polishes without using acids or harsh abrasives. ___________________________________________________________________________________________________________________________________________________________________________________
Howard Butcher Block & Cutting Board Oil Howard Butcher Block and Cutting Board Oil contains food grade mineral oil stabilized with Vitamin E. Our Butcher Block and Cutting Board Oil meets FDA requirements for food contact surfaces, and is safe for all food preparation surfaces. It is tasteless, and will never go rancid. This product is perfect for seasoning cutting boards, butcher blocks and wooden utensils. Meets all requirements for USP Light Mineral Oil, National Formulary (NF), FDA 21 CFR 172.878 and 21 CFR 178.3620 (a) for direct and indirect contact with food. Features & Benefits: Colorless Odorless Tasteless Will not go rancid Food Surface Safe ________________________________________________________________________________________________________________________________________________________________________________________